,

Plagiarism Checker Reports Explained for SA Students (2026)

Plagiarism Checker Reports Explained for SA Students (2026)

Every South African postgraduate meets a plagiarism checker sooner or later, usually the week before submission, when a percentage appears next to the dissertation and panic sets in. The number on its own tells you far less than most students think. This guide explains what a plagiarism checker such as Turnitin actually does, how to read the similarity report line by line, which matches are harmless and which need work, and how to fix genuine problems in your own words before your supervisor or examiner sees them. If you are restructuring a chapter at the same time, Tesify helps you structure your dissertation chapter by chapter; checking similarity stays with your university’s system.

What a plagiarism checker actually does

The name is misleading. A plagiarism checker does not decide whether you plagiarised. It compares your text with a database and highlights where your wording matches something already there. The University of Cape Town’s CILT help desk puts it plainly: similarity reports do not detect plagiarism; they merely highlight unoriginal text, meaning text that matches text already in the comparison database, and reference quotes in your submission. Wits University’s guidance for students says the same: although Turnitin is known to scan your document for plagiarism, it does not check for plagiarism in your work. It flags matches so that your lecturer can review them and decide whether each match is acceptable.

According to the UCT guide, Turnitin compares a submission with three kinds of source:

  • billions of pages of active and archived internet content;
  • a repository of periodicals, journals and publications;
  • a repository of work previously submitted to Turnitin, including student assignments submitted at UCT and other institutions around the world.

It also notes what is not checked, such as very new web content and password-protected sites. That is why a low score does not prove a text is original and a high score does not prove it is copied.

The similarity index and its colour bands

The headline figure is the similarity index: the percentage of your document that matches other sources. The UCT guide explains that it is the sum of the individual source percentages, so twenty sources matching 1% each produce an index of 20%. Both the UCT and Wits guides describe the same colour bands:

Colour Matching text
Blue No matching text (0%)
Green One word to 24%
Yellow 25–49%
Orange 50–74%
Red 75–100%

The colours describe how much text matches, not whether the text is acceptable. The UCT guide is explicit that the similarity index cannot be used as an indicator of whether plagiarism has occurred or not. Some departments set their own thresholds for when a supervisor must look more closely; if yours has one, it will be in the faculty rules or your module guide, and it should be read as a trigger for review rather than a pass mark.

Student reviewing a printed chapter with highlighted passages and a pen beside a laptop
Classify every highlighted passage: fine, citation fix or rewrite.

How to read the report, source by source

The number is the least useful part of the report. The detail underneath is where you learn something.

  1. Open the Match Overview. This lists each source that matched and the percentage of your text matched to it. One source at 9% is a very different situation from thirty sources at under 1% each.
  2. Look at the highlighted passages. Matched text is numbered and colour-coded in your document so you can see exactly which sentences are involved.
  3. Use the Match Breakdown. Clicking a source shows how many times it matched and, with the arrow beside it, other sources that could be the original. A match to another student’s paper often turns out to be a match to the journal article you both quoted.
  4. Apply the filters you are allowed. The UCT guide notes that students can exclude quotations and the bibliography, and exclude matches below a set number of words or percentage, then click Apply Changes. As a student you cannot exclude individual sources from the comparison.

Work through every highlighted passage and put it into one of three categories: fine as it is, fix the citation, or rewrite. That classification, not the percentage, tells you how much work is left.

Matches that are usually harmless

The UCT guide lists the main reasons a high figure does not necessarily mean plagiarism:

  • Correctly referenced quotations. A direct quote in quotation marks with a citation will match its source. That is expected.
  • Your reference list. Entries will match other students’ lists that cite the same works.
  • Common phrases in your field. Phrases such as “the aim of this study was to” or the formal name of a South African Act will match thousands of documents.

Other matches that are normally explainable in a dissertation: the title of a validated questionnaire, standard ethics statements your faculty requires, the names of institutions, and your own earlier work if you previously submitted the proposal through the same system. That last one is worth raising with your supervisor in advance, because some universities treat reuse of your own submitted text differently.

Matches that need work, and how to fix them yourself

Three patterns signal real problems. Each has an honest fix that keeps the work yours.

1. A paraphrase that is too close to the original

This is the most common issue in literature reviews. You read a source, kept its sentence structure and swapped a few words. The fix is not to swap more words. Close the source, write down the point from memory in one sentence, then compare it with the original to check accuracy and cite it. If you cannot say it without looking, you have not yet understood it well enough to use it.

2. A long run of matching text with no quotation marks

If the wording is important (a definition, a policy clause, a participant’s words from a published study), turn it into a short direct quotation with quotation marks, a citation and a page number. If the wording is not important, summarise it in your own sentence. Do not leave long quotations in a dissertation to carry your argument; examiners read that as a lack of synthesis.

3. Patchwriting across several sources

A paragraph assembled from sentences of three different articles will match all three. Rebuild it around your own claim: state what the sources show together, where they disagree and what that means for your study, then cite each source for the specific point it supports. Our guide to writing a literature review for a South African dissertation shows how to organise sources by theme rather than by author.

Student writing notes by hand from memory with a closed journal article beside the notebook
Close the source, write the point from memory, then check and cite.

Worked example: fixing a close paraphrase (illustrative)

Suppose a nursing student’s literature review contains this sentence, which the report highlights as a 40-word match to a journal article:

Nurses working in rural primary health care clinics frequently report high workloads, shortages of essential equipment and limited opportunities for continuing professional development, which together contribute to burnout and intention to leave.

The student had changed two words from the original. A better process:

  1. Identify the claim. Rural clinic nurses face workload, equipment and development problems, and these are linked to burnout and turnover intention.
  2. Ask what your study needs from it. If your study is about turnover intention in one district, the link to turnover is the point; the list of stressors is background.
  3. Write your own sentence, then cite. “Turnover intention among rural clinic nurses has been linked to working conditions rather than pay alone, particularly workload and access to professional development (Author 2021).”
  4. Add synthesis. Follow with a sentence comparing this source with another one, or noting that it does not cover your district. That sentence is yours and needs no citation.

The new version will not match the source, but more importantly it now does a job in your argument. The example and the citation are illustrative; use the real author and year from your own source.

Similarity reports and AI writing indicators are different things

Some universities now show an AI writing indicator alongside the similarity report. It is a separate feature that attempts to estimate whether text was generated by an AI model, and it does not measure matching text at all. A low similarity percentage says nothing about AI use, and an AI indicator says nothing about copied text. Your university’s policy determines how each is used; if AI use is permitted in limited ways, document what you did and follow the acknowledgement rules your faculty sets. The safest position is the simplest one: write the dissertation yourself and keep your drafts, notes and version history as evidence of your process.

Talking to your supervisor about a report

Supervisors see similarity reports all the time, and most care far more about how you respond than about the first number. When you send a chapter with its report, add a short note: the overall figure, the largest single-source match and what it is (for example, “7% from my own proposal submitted in 2025”), and what you have already fixed. That note shows you understand the report, which is the academic skill the process is meant to build. If you disagree with how a match is being interpreted, ask to go through the highlighted passages together rather than arguing about the percentage. If your supervisor is slow to respond as submission approaches, raise the timeline early and in writing.

What does not fix a similarity problem

  • Synonym swapping and “paraphrasing” tools. Text pushed through a rewording tool often reads badly, can change the meaning, and may breach your university’s rules on outside assistance and AI use. See our overview of whether AI is allowed for dissertations at South African universities.
  • Removing citations. Deleting references lowers nothing and creates the very problem the report is meant to reveal.
  • Hiding text in images or tricks with characters. Universities treat attempts to manipulate the checker as misconduct in their own right.
  • Running the dissertation through unknown websites. Uploading your unpublished work to a site you do not know may store it, and you lose control of where your text goes. Use the system your university provides, through your module or postgraduate office.

A pre-submission routine for your dissertation

  1. Check your faculty rules for the similarity process: who submits, at what stage, and whether a report must accompany your submission. Our guide on how to submit your dissertation for examination covers the usual steps.
  2. Run each chapter through your university’s checker as soon as it is drafted rather than the whole document at the end.
  3. Classify every highlighted passage as fine, citation fix or rewrite, and keep a short log.
  4. Fix citations first, then rewrite close paraphrases in your own words.
  5. Check that every in-text citation has a reference list entry; see our Harvard vs APA guide if your faculty allows either.
  6. Discuss any remaining large single-source match with your supervisor before submission, not after.

FAQ

Does a plagiarism checker prove that I plagiarised?

No. UCT and Wits guidance both state that the similarity report highlights matching text and does not itself detect plagiarism. A person reviews the matches and decides.

What similarity percentage is acceptable for a dissertation?

There is no universal figure. The similarity index cannot show whether plagiarism occurred, so read the sources behind the number. If your department sets a review threshold, it is in the faculty rules.

Why is my reference list highlighted?

Your entries match other documents citing the same works. You can usually filter out the bibliography and quotations when viewing the report as a student.

Can I exclude a source from my Turnitin report?

According to UCT’s student guide, students cannot exclude individual sources from the comparison, but can filter quotations, the bibliography and small matches.

Is a low similarity score a guarantee?

No. Turnitin does not check every source, such as password-protected content, so a low score does not prove originality.

Does Tesify check my dissertation for plagiarism?

No. Tesify helps you structure your dissertation chapter by chapter. Similarity checking is done through your university’s own system, and the text stays 100% written by you.

Structure your dissertation with Tesify

Most similarity problems start with a chapter that has no clear argument of its own. 50,000+ students have written 230,000+ chapters with Tesify, which helps you structure your dissertation chapter by chapter, and every word stays 100% written by you. Structure your dissertation with Tesify.

Sources cited

  • University of Cape Town, CILT Help Desk Team (n.d.) How to Interpret a Turnitin Similarity Report. Available at: cilt.uct.ac.za.
  • University of the Witwatersrand, CLTD (n.d.) Interpreting the Similarity Index. Available at: wits.ac.za.